Exterior Entry Front

32x79x1.75 Vintage Antique SOLID Wood Wooden Exterior Entry Door Window Glass


32x79x1.75 Vintage Antique SOLID Wood Wooden Exterior Entry Door Window Glass
32x79x1.75 Vintage Antique SOLID Wood Wooden Exterior Entry Door Window Glass
32x79x1.75 Vintage Antique SOLID Wood Wooden Exterior Entry Door Window Glass
32x79x1.75 Vintage Antique SOLID Wood Wooden Exterior Entry Door Window Glass

32x79x1.75 Vintage Antique SOLID Wood Wooden Exterior Entry Door Window Glass   32x79x1.75 Vintage Antique SOLID Wood Wooden Exterior Entry Door Window Glass

32"x79"x1.75 Vintage Exterior Door w/4 Windows & 4 Panels. Vintage, exterior door salvaged from an old home in Northeastern Pennsylvania. It's made of solid. Pine, and is painted white on both sides.

When most people hear "pine" they think of a cheap, weak, soft wood. New pine hewn from 10 - 20 year old trees don't have the same insect-resistant, rot-resistant, or even fire-resistant qualities that old pine, hewn from trees hundreds of years old have. Old pine is also much harder and stronger than young pine. It has a lovely arrangement of 4, true-divided, glass lites arranged in a fan pattern. There are 4 raised panels below.

Hardware : The door is not equipped with any hardware. Quirks & Considerations : The door's height was unevenly cut by 1/2 at some point, most likely to compensate for the home's settling foundation or a warped floor. The previous owner cut 1/4" off of the width door to make it 31 3/4". He didn't use a table saw, and free-handed it with a power saw.

He cut it straight for the most part but messed up a bit at the top of the door causing a slight curve (see last photo) which is obvious when looking at the front of the door. The door measures 31 1/2 at the top that curve. We could cut the door to 31 1/2" or narrower and we could also build it back up to 32" or wider. One of the curved pieces of window molding is missing from the front side of the door.

We could make and add the piece. There are 3 thin (1/16" - 1/8") gaps on the hinge stile.

This is not a serious issue and the door could still be installed and used for decades without the gaps widening. However, we could close the gaps using clamps and reinforce/secure the corner using modern glue and some dowels (wooden joints)-- message us for a quote. Condition : The door is in good structural condition.

Has the typical nicks, scrapes, scratches, and small nail holes that you would expect to find on an old, used door but there no breaks, cracks, rot, warp, or any serious issues. The door has will disappear after sanding, prior to refinishing or repainting, and whatever remains will be subtle, "character marks".

All of the glass is intact and also in great condition with only subtle scratches. We could refinish or partially or completely strip the door to prepare it for you to repaint or refinish.

We have MANY photos of doors that we've restored that could give you an idea of how this door could clean up. The door is set up to swing into a house towards the right or away towards the left.

We could change the swing. Modification : We could also modify this door to fit your opening or suite your needs. We could make a frame, trim or add to the height or width, replace glass, reverse the swing, plug the hardware holes, etc. 31 3 /4 " x 78 5 /8 - 79 1/8" x 1 3/4. Too tall, short, wide or narrow?

MD, DC, DE, PA, NJ, NY, & New England : We deliver to these states every 2 - 3 weeks. This item is in the category "Antiques\Architectural & Garden\Doors". The seller is "pennantique" and is located in this country: US. This item can be shipped to United States.

  1. Color: White
  2. Decade: 1960s
  3. Material: Pine, Wood
  4. Original/Reproduction: Vintage Original
  5. Type: Front Door
  6. Features: Reclaimed, Salvage


32x79x1.75 Vintage Antique SOLID Wood Wooden Exterior Entry Door Window Glass   32x79x1.75 Vintage Antique SOLID Wood Wooden Exterior Entry Door Window Glass